 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NC7SZ14 TinyLogic UHS Inverter with Schmitt Trigger Input October 1996 Revised August 2004 NC7SZ14 TinyLogic UHS Inverter with Schmitt Trigger Input General Description The NC7SZ14 is a single Inverter with Schmitt Trigger input from Fairchild's Ultra High Speed Series of TinyLogic. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V VCC range. The input and output are high impedance when VCC is 0V. Inputs tolerate voltages up to 6V independent of VCC operating voltage. Features s Space saving SOT23 or SC70 5-lead package s Ultra small MicroPak leadless package s Ultra High Speed; tPD 3.7 ns Typ into 50 pF at 5V VCC s High Output Drive; 24 mA at 3V VCC s Broad VCC Operating Range; 1.65V to 5.5V s Matches the performance of LCX when operated at 3.3V VCC s Power down high impedance inputs/output s Overvoltage Tolerant inputs facilitate 5V to 3V translation s Patented noise/EMI reduction circuitry implemented Ordering Code: Order Number NC7SZ14M5X NC7SZ14P5X NC7SZ14L6X Package Number MA05B MAA05A MAC06A Product Code Top Mark 7Z14 Z14 B6 Package Description 5-Lead SOT23, JEDEC MO-178, 1.6mm 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 6-Lead MicroPak, 1.0mm Wide Supplied As 3k Units on Tape and Reel 3k Units on Tape and Reel 5k Units on Tape and Reel Logic Symbol IEEE/IEC Connection Diagrams Pin Assignments for SOT23 and SC70 Pin Descriptions Pin Names A Y NC Description Input Output No Connect (Top View) Pad Assignments for MicroPak Y=A Input A L H H = HIGH Logic Level L = LOW Logic Level Function Table Output Y H L (Top Thru View) TinyLogic is a registered trademark of Fairchild Semiconductor Corporation. MIcroPak is a trademark of Fairchild Semiconductor Corporation. (c) 2004 Fairchild Semiconductor Corporation DS012176 www.fairchildsemi.com NC7SZ14 Absolute Maximum Ratings(Note 1) Supply Voltage (VCC ) DC Input Voltage (VIN) DC Output Voltage (VOUT) DC Input Diode Current (IIK) @VIN < -0.5V @VIN > 6V DC Output Diode Current (IOK) @VOUT < -0.5V @VOUT > 6V, VCC = GND DC Output Current (IOUT) DC VCC/GND Current (ICC/IGND) Storage Temperature (TSTG) Junction Temperature under Bias (TJ) Junction Lead Temperature (T1); (Soldering, 10 seconds) Power Dissipation (PD) @ +85C SOT23-5 SC70-5 200 mW 150 mW 260C -0.5V to +6V -0.5V to +6V -0.5V to +6V -50 mA +20 mA -50 mA +20 mA 50 mA 50 mA -65C to +150C 150C Recommended Operating Conditions (Note 2) Supply Voltage Operating (VCC) Supply Voltage Data Retention (VCC) Input Voltage (VIN) Output Voltage (VOUT) Operating Temperature (TA) Thermal Resistance (JA) SOT23-5 SC70-5 300C/W 425C/W 1.65V to 5.5V 1.5V to 5.5V 0V to 5.5V 0V to VCC -40C to +85C Note 1: Absolute maximum ratings are DC values beyond which the device may be damaged or have its useful life impaired. The datasheet specification should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside datasheet specifications. Note 2: Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol VP Parameter Positive Threshold Voltage VCC (V) 1.65 1.8 2.3 3.0 4.5 5.5 VN Negative Threshold Voltage 1.65 1.8 2.3 3.0 4.5 5.5 VH Hysteresis Voltage 1.65 1.8 2.3 3.0 4.5 5.5 VOH HIGH Level Output Voltage 1.65 1.8 2.3 3.0 4.5 1.65 2.3 3.0 3.0 4.5 Min 0.6 0.7 1.0 1.3 1.9 2.2 0.2 0.25 0.40 0.6 1.0 1.2 0.1 0.15 0.25 0.4 0.6 0.7 1.55 1.7 2.2 2.9 4.4 1.29 1.9 2.4 2.3 3.8 TA = +25C Typ 1.0 1.1 1.4 1.75 2.45 2.9 0.5 0.55 0.75 1.0 1.43 1.70 0.48 0.54 0.65 0.77 1.01 1.18 1.65 1.8 2.3 3.0 4.5 1.52 2.15 2.80 2.68 4.20 Max 1.4 1.5 1.8 2.2 3.1 3.6 0.8 0.9 1.15 1.5 2.0 2.3 0.9 1.0 1.1 1.2 1.5 1.7 TA = -40C to +85C Min 0.6 0.7 1.0 1.3 1.9 2.2 0.2 0.25 0.40 0.6 1.0 1.2 0.1 0.15 0.25 0.4 0.6 0.7 1.55 1.7 2.2 2.9 4.4 1.29 1.9 2.4 2.3 3.8 V IOH = -4 mA IOH = -8 mA IOH = -16 mA IOH = -24 mA IOH = -32 mA V VIN = VIL IOH = -100 A Max 1.4 1.5 1.8 2.2 3.1 3.6 0.8 0.9 1.15 1.5 2.0 2.3 0.9 1.0 1.1 1.2 1.5 1.7 V V V Unit Conditions www.fairchildsemi.com 2 NC7SZ14 DC Electrical Characteristics Symbol VOL Parameter LOW Level Output Voltage VCC (V) 1.65 1.8 2.3 3.0 4.5 1.65 2.3 3.0 3.0 4.5 IIN IOFF ICC Input Leakage Current Power Off Leakage Current Quiescent Supply Current 0 to 5.5 0.0 1.65 to 5.5 (Continued) TA = +25C TA = -40C to +85C Max 0.1 0.1 0.1 0.1 0.1 0.24 0.3 0.4 0.55 0.55 1 1 2.0 Min Max 0.1 0.1 0.1 0.1 0.1 0.24 0.3 0.4 0.55 0.55 10 10 20 A A A V IOL = 4 mA IOL = 8 mA IOL = 16 mA IOL = 24 mA IOL = 32 mA VIN = 5.5V, GND VIN or VOUT = 5.5V VIN = 5.5V, GND V VIN = VIH IOL = 100 A Unit Conditions Min Typ 0.0 0.0 0.0 0.0 0.0 0.08 0.10 0.15 0.22 0.22 AC Electrical Characteristics Symbol tPLH, tPHL Parameter Propagation Delay VCC (V) 1.65 1.8 2.5 0.2 3.3 0.3 5.0 0.5 tPLH, tPHL CIN CPD Input Capacitance Power Dissipation Capacitance Propagation Delay 3.3 0.3 5.0 0.5 0 3.3 5.0 Min 2.0 2.0 1.0 1.0 0.5 1.5 0.8 TA = +25C Typ 9.1 7.6 5.0 3.7 3.1 4.4 3.7 4 24 30 Max 15.0 12.5 9.0 6.3 5.2 7.2 5.9 TA = -40C to +85C Min 2.0 2.0 1.0 1.0 0.5 1.5 0.8 Max 15.6 13 9.5 6.5 5.5 7.5 6.2 ns pF pF (Note 3) Figure 2 CL = 50 pF, RL = 500 Figures 1, 3 ns CL = 15 pF, RL = 1 M Figures 1, 3 Unit Conditions Figure Number Note 3: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression: ICCD = (C PD) (VCC) (fIN) + (ICC static). AC Loading and Waveforms CL includes load and stray capacitance Input PRR = 1.0 MHz; tw = 500 ns FIGURE 1. AC Test Circuit FIGURE 3. AC Waveforms Input = AC Waveform; tr = tf = 1.8 ns PRR = 10 MHz; Duty Cycle = 50% FIGURE 2. ICCD Test Circuit 3 www.fairchildsemi.com NC7SZ14 Tape and Reel Specification TAPE FORMAT for SOT23 and SC70 Package Tape Designator M5X, P5X Section Leader (Start End) Carrier Trailer (Hub End) TAPE DIMENSIONS inches (millimeters) Number Cavities 125 (typ) 3000 75 (typ) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed Package SC70-5 SOT23-5 Tape Size 8 mm 8 mm DIM A 0.093 (2.35) 0.130 (3.3) DIM B 0.096 (2.45) 0.130 (3.3) DIM F (3.5 0.10) (3.5 0.05) DIM Ko (1.35 0.10) (1.4 0.11) DIM P1 0.157 (4) 0.157 (4) DIM W 0.315 0.004 (8 0.1) 0.315 0.012 (8 0.3) 0.138 0.004 0.053 0.004 0.138 0.002 0.055 0.004 www.fairchildsemi.com 4 NC7SZ14 Tape and Reel Specification TAPE FORMAT for MicroPak Package Designator L6X Tape Section Leader (Start End) Carrier Trailer (Hub End) (Continued) Number Cavities 125 (typ) 5000 75 (typ) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed REEL DIMENSIONS inches (millimeters) Tape Size 8 mm A 7.0 (177.8) B 0.059 (1.50) C 0.512 (13.00) D 0.795 (20.20) N 2.165 (55.00) W1 0.331 + 0.059/-0.000 (8.40 + 1.50/-0.00) W2 0.567 (14.40) W3 W1 + 0.078/-0.039 (W1 + 2.00/-1.00) 5 www.fairchildsemi.com NC7SZ14 Physical Dimensions inches (millimeters) unless otherwise noted 5-Lead SOT23, JEDEC MO-178, 1.6mm Package Number MA05B www.fairchildsemi.com 6 NC7SZ14 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide Package Number MAA05A 7 www.fairchildsemi.com NC7SZ14 TinyLogic UHS Inverter with Schmitt Trigger Input Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 6-Lead MicroPak, 1.0mm Wide Package Number MAC06A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 8 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com |
Price & Availability of NC7SZ1404
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |